About Us
top of page
Projector Replacement Lamp for Mitsubishi LVP-XL25 / LVP-XL25U / LVP-XL30 /SL25U

Projector Replacement Lamp for Mitsubishi LVP-XL25 / LVP-XL25U / LVP-XL30 /SL25U

SKU: 440512356_MY-649478339
  • Type: Original Bulb with OEM Housing / Original bulb with Original Housing (Depending on projector model)
    • VLT-XL30LP Genuine Original Projector Lamp with Housing for MITSUBISHI LVP-XL25 / LVP-XL25U / LVP-XL30 / LVP-XL30U / SL25U
    • Brand Name: Mitsubishi
    • Model Number: VLT-XL30LP
    • HID: Mercury Lamps
    • Voltage: 85-265V
    • Average Life (hrs): 4000 ~ 8000 hours (Depending on Projector model and usage)
    • Warranty: 6 Months or 500 hours whichever comes first
    • Wattage: 270W
    • Type: Original Bulb with OEM Housing/Original bulb with Original Housing (Depending on Projector model)
    • All our bulbs are guaranteed genuine OSRAM/PHILIPS/USHIO bulbs depending on model. This product contains mercury. Kindly dispose used bulbs according to your local laws.
    • All Projector lamps by Infinite IT will be shipped within 1-3 working days (Mon-Fri).
  • Return and Warranty Policy


    Warranty only covers Manufacture defects. All goods under warranty must be returned before a new replacement unit will be sent out. Any damage determined to not be caused by manufacture defects will not be covered by this policy.



    We do not accept any return or refunds once order is placed. Kindly contact us if you are unsure about your lamp model. 

  • General Lamp Replacement Instructions

    1. Make sure projector is turned off and the power source is disconnected.

    2. Let the projector cool down for at least an hour.

    3. Locate the lamp cover. (Usually at the bottom of the projector)

    4. Unscrew the lamp cover and the screws connecting the lamp to the projector.

    5. Remove the entire lamp module including the casing by lifting the lamp handle.

    6. Insert new lamp module into projector and screw back carefully making sure that the lamp connector/cord is securely connected to the projector.

    7. Screw back lamp cover.

    8. Plug into power source and press the start button.

    9. Locate the